The combination of flat aluminium sheets with inset shadow joint, tight inner corner and outer corner solutions, allow for a contemporary and minimalist design.
Façade frames, delivered to size, are screwed to the wall. Then, the embedded aluminium shadow joint, plinth or corner is slid into the facade profile and the next facade frame can be mounted. The aluminium outer plate, also supplied to size, is mounted on the gable frame using magnets.
Wall cladding and sectional doors are thus invisibly attached without glue or silicone.
Which fixing systems are currently used?
screw onto tooth and next planchet covers the screw (as for wooden planchettes)
Pros
- replaceable
Pros
- replaceable
Pros
- replaceable
Pros
- replaceable
Pros
- none
Cons
- not pretty and, moreover, the vise holes should be in slot shape to allow dilation of the material
Cons
- break down from top to bottom
Cons
- break down from left to right or vice versa
Cons
- must be glued perfectly correctly = delicate!
Cons
- weather conditions
- tighten up and come back later to remove sergeants
- totally irreplaceable
Pros
- replaceable
Cons
- not pretty and, moreover, the vise holes should be in slot shape to allow dilation of the material
screw onto tooth and next planchet covers the screw (as for wooden planchettes)
Pros
- replaceable
Cons
- break down from top to bottom
Pros
- replaceable
Cons
- break down from left to right or vice versa
Pros
- replaceable
Cons
- must be glued perfectly correctly = delicate!
Pros
- none
Cons
- weather conditions
- tighten up and come back later to remove sergeants
- totally irreplaceable
Why is Frager Facade a better alternative? The advantages at a glance!
The invisible mounting ensures an aesthetic and elegant look.
Door, garage door and facade: everything can be mounted in the same plane.
Like Magnetude®, Frager Facade allows dilation. When gluing or screwing boards, expansion and contraction of the board material is problematic.
On-site gluing takes time and everything needs to be secured for a time with tension screws. Moreover, they have to be returned to be removed after drying time. At Frager Facade, none of this.
Frager Facade can be installed in all weather conditions (gluing requires a temperature of minus 8 degrees and no rain).
The Frager Facade panels are replaceable in case of damage.
Unlike visible screwing or gluing, magnets have no ageing problems.
All components are separately recyclable which is not the case with glued systems. In this way, Frager Facade is always circular in the future too.
With Frager Facade, architects enjoy unprecedented design freedom. Creativity without limits.
- aluminium+foil (great for sectional doors),
- mirrors, glass, copper, brass, burnt wood in mosaic, ceramics, natural stone, plant containers, solar panels full black, LED light: LED embedded in façade profile and exterior panel with openings (a drawing in the façade can be created by light points)
- lighting can be mounted on any panel (all existing exterior lighting)
- 24 V wiring always accessible in case of problems!
- recessed videophone: aesthetic solution - flush-mounted
Creative freedom, undisputed added value
Become a Frager dealer
Are you interested
in working with our products?